Showing 1–24 of 39 results
Keep your rod and reel securely attached to the deck of your kayak with the Harmony Rod Holder Clip Kit. Forget about getting snagged in the trees or branches while paddling to your favorite fishing hole. The Rod Holder Clip is perfect for any fisherman who likes a keep their kayak orderly and functional. The tension molded clips can be easily attached to the side or top deck of most kayaks.
This all new rod holder extension from Hobie fits into the molded-in rod holders and is fully adjustable for optimal trolling and storage angles.
Flush Mount Rod Holder Base for your Scotty Rod. Mount this to your kayak and you can use any Scotty rod holder on your kayak.
Hobie GearTrac with mounting hardware comes in the lengths: 8″, 12″, & 16″. This mounting systems made for Hobie bt Yakattack give you total freedom of adjustability. Change your set up from trolling, to fly fishing, to hunting quickly and easily. Use in combination with either the MightyMount or the ScrewBall to attach rod holders, gps, panfish camera mount for your GoPro. Gear Trac is the solution for your accessory needs.
Hobie Part # 72020057 8″
Hobie Part # 72020058 12″
Hobie Part # 72020059 16″
The Hobie H-Rail Cup Holder provides an easy way to keep your drink close and secure.
Expanding their H-Rail product line, Hobie has added the H-Rail G-Hold to make your experience even better.
Have an accessory in mind, but can’t find it in the H-Rail product line? Don’t stress any longer! Hobie has created the H-Rail Miniport which allows you to fit any Railblaza accessory to your boat. The sky is the limit with this new accessory! As with all H-Rail products, the attachment to the H-Rail is simple and quick.
This mount allows you to attach Ram Ball mounted accessories to the 12-sided Hobie H-Rail without any drilling or tools needed.
1.5 inch Ram Ball allows you to attach Ram Ball mounted accessories to the Hobie H-Rail
• Install or remove quickly and easily without the use of tools
• Clamp secures the mount in place without any twisting or sliding
• Attaches to the H-Rail on 2015 Hobie Pro Angler 12, 14, and 17 kayaks
The Hobie H-Rail Mounting Plate gives you the freedom to mount any accessory to the all new Hobie H-Rail.
This new Hobie Rod Holder Extension clamps to your H-Rail making set up and adjustment easy as pie.
The rod rack allows you to attach up to three rods to the 12-sided Hobie H-bar without any drilling or tools needed.
Now you can mount the Railblaza StarPort HD with no drilling or tools. The Hobie H-Rail StarPort HD provides a quick and easy way to safely attach this base mount so you can add any accessory you’ve been dreaming of.
Hobie Horizontal Rod Holder Kit keeps your fishing rod secure and protected along the side of your kayak. Insert the rod tip into the tip protector and lock the rod handle into the clasp. Easy to install using the provided hardware.
Hobie Part # 72021060
Hobie MightyMount – These low-profile MightyMounts are a perfect mounting system for a variety of applications.
Make sure your gear is secure with the Railblaza G-Hold. This great accessory securely attaches to anything with at least a 2 inch diameter.
Hobie has teamed up with Railblaza to create an easy way to attach accessories to your Hobie AKA (V2).
Now you can attach all your gear and accessories to any craft, including inflatables!
This easy kit makes installation and use quick and easy. The Railblaza Rod Holder II with StarPort HD creates a secure place to keep your rods.
The Railblaza Rotating Platform takes versatility to a whole new level with the ability to be quickly clipped into or removed from any Railblaza StarPort.
The Railblaza StarPort HD is has an even lower profile than the already low profile Railblaza StarPort. This mount fits directly into any space patterned for Scotty, RAM, Cannon, and many other track systems.
The Railblaza StarPort is the key to all things great! Hobie and Railblaza have teamed up to bring you some of the most user-friendly and versatile mounts and accessories, including the Railblaza StarPort which can be used as a flush mount base or deck mount.
The 1″ Ram Mount was chosen specifically by Hobie. The wedge mount works perfectly in the sail mast plug that is just in front of all margie drives on all hobie mirage drive kayaks.
Add a 1.5″ Ram Ball to the front of any Hobie Mirage Drive kayak. This baby will plug right into the Sail mount. Blam. Done and no drilling!
Showing 1–24 of 39 results