mount gear on your kayak, Ram Ball mounts, Gear Tracks, Rail Blaza
Showing 1–24 of 83 results
Paddle anywhere with your favorite cold beverage. The Harmony RAM mount Cup Holder keeps your beverage level, frosty and within reach. Mount the 1.5’’ ball anywhere on the deck of your boat or use with an existing ball mount. A foam sleeve cozy is included to keep your drinks chilled at all times.
Keep your rod and reel securely attached to the deck of your kayak with the Harmony Rod Holder Clip Kit. Forget about getting snagged in the trees or branches while paddling to your favorite fishing hole. The Rod Holder Clip is perfect for any fisherman who likes a keep their kayak orderly and functional. The tension molded clips can be easily attached to the side or top deck of most kayaks.
This is the best paddle clip for those of you wanting a quick and simple solution to holding your paddle. It bolts on in 2 spots and can be mounted virtually anywhere on your kayak. Makes it fast and easy way to hold your paddle so you dont have to!
Hobie’s 12V Battery Holder helps keep your fishfinder battery high and dry within the kayak hull.
The new, Hobie Adjustable H-Bar fits most MirageDrive Kayaks and offers a variety of height settings. It offers the ability to pull yourself from a seated position, lean against it to stabilize, and hold on to assist in entering the kayak.
This all new rod holder extension from Hobie fits into the molded-in rod holders and is fully adjustable for optimal trolling and storage angles.
Give yourself another spot to tie off a line or anchor by installing the Hobie Cleat on your kayak. Gives you the flexibility to tie off or attach line to multiple spots. Some drilling is required for installation. Hardware not included
If you are missing a screw in cleat, this is the replacement part you need. It is threaded to fit into existing Hobie molded in screw in fitting areas. you can use this to replace or change your current screw in fittings on the deck of your Hobie kayak
Hobie Electrical Connector Set- Set of male / female waterproof plugs with wires and 4 waterproof(silicone filled wire nut) connectors.Hobies wiring connector set makes it easy to plug in your fish finder into almost any sealed battery. The waterproof connection works great and lasts for years of use for plugging right into most sealed batteries. Works on all Fishfinder batteries we sell.
Hobie Part # 72021027
Hobie Fishfinder 12V battery, so you can spend your time fishing, instead of searching for the honey hole. Don’t get caught without power, bring a spare battery.
Hobie Fishfinder 12V battery charger makes sure your fishfinder is powered up so you can detect all of the fish you’re going to catch. Don’t spend your day on the water trying to re-invent solar power, make sure your time is spent fishing by charging your batteries in advance.
Hobie Fish finder installation kit makes Fish Finders EASY . The transducer ‘sees’ right through the plastic hull. No need to drill a hole through the bottom of your kayak! The installation kit is both simple and very complete kit. It’s adaptable to any kayak and will run just about any small fish finder out out there. If you want to run a color Fish finder or a regular size finder get the Full Size Fish Finder Installation Kit. All you need to do is decide just where you are going to mount the your display! Kit includes: Dry Bag, Battery Harness, AA Batteries, Snap Connector, Foam Transducer Pad, Zip Ties, Marine Goop, Displacement Connectors, Rubber Grommet. Hobie Part # 72020011
Flush Mount Rod Holder Base for your Scotty Rod. Mount this to your kayak and you can use any Scotty rod holder on your kayak.
Hobie Fly Fishing Package combines a Fly Rod Holder – RAM, the Sidekick AMA Kit (Dark Green color), and a Hobie Gear Keeper to round your your fly fishing kayak gear. It’s a great way to add stability to your set up.
The Full Size Fish Finder Installation Kit gives you the power to run a full size or color fish finder right from the cockpit of your kayak. The full size kit includes a waterproof gel cell 12-volt rechargeable battery with all the mounting equipment you’ll need. This upgraded package gets you the juice to power your full size fish finder, or power your compact fish finder longer. Enjoy the benefits of an easy to install kit for your fish finder, and save money without the added hassle of needing new batteries all the time!
Hobie Part # 72020039
It’s a lot easier than you think:
Hobie GearTrac with mounting hardware comes in the lengths: 8″, 12″, & 16″. This mounting systems made for Hobie bt Yakattack give you total freedom of adjustability. Change your set up from trolling, to fly fishing, to hunting quickly and easily. Use in combination with either the MightyMount or the ScrewBall to attach rod holders, gps, panfish camera mount for your GoPro. Gear Trac is the solution for your accessory needs.
Hobie Part # 72020057 8″
Hobie Part # 72020058 12″
Hobie Part # 72020059 16″
Take your gun with you on your kayak and keep it safe with Hobie’s Gun Mount.
The Hobie H-Rail Cup Holder provides an easy way to keep your drink close and secure.
Expanding their H-Rail product line, Hobie has added the H-Rail G-Hold to make your experience even better.
Have an accessory in mind, but can’t find it in the H-Rail product line? Don’t stress any longer! Hobie has created the H-Rail Miniport which allows you to fit any Railblaza accessory to your boat. The sky is the limit with this new accessory! As with all H-Rail products, the attachment to the H-Rail is simple and quick.
1.5 inch Ram Ball allows you to attach Ram Ball mounted accessories to the Hobie H-Rail
• Install or remove quickly and easily without the use of tools
• Clamp secures the mount in place without any twisting or sliding
• Attaches to the H-Rail on 2015 Hobie Pro Angler 12, 14, and 17 kayaks
Showing 1–24 of 83 results